When using Microsoft® Windows® 2000 or Windows Server™
native backup, ensure that the proper drivers for the library and drives are
installed. If any doubt exists about the proper drivers residing on the system,
use the following procedures to install the appropriate drivers.
Dell PowerVault
132T Library Driver Installation
Connect the library to the host and restart the machine.
Insert the Dell PowerVault 132T Library Documentation and Drivers
CD into the CD drive.
Start the Windows 2000 or Windows Server 2003 Device Manager.
In the Device Manager, select Medium Changers.
Right click on the Unknown Medium Changer device.
Select Properties from the pop-up menu.
Select the Driver tab on the properties page.
Click the Update driver... button. This will start the
Upgrade Device Driver Wizard. Click Next.
Select the option Search for a suitable driver for my device.
Click Next.
In Optional search locations check only CD-ROM drives.
Click Next.
Setup will select the installation file, pv132t.inf. Click Next.
Required files will be installed for the driver now.
Click Finish.
Click Close on the Properties page.
Make sure that in Device Manager, under Medium
changers, Dell (TM) PowerVault (TM) 132T Tape Library is listed.
Dell PowerVault 132T Tape Driver Installation
Insert the Dell PowerVault 132T Library Documentation and Drivers
CD into the CD drive.
Start the Windows Server 2003 or Windows 2000 Device Manager.
Find the appropriate device in the Device Manager. Available
options are:
LTO-3: IBM ULTRIUM-TD3 SCSI Sequential Device
LTO-2: IBM ULTRIUM-TD2 SCSI Sequential Device
LTO-1: IBM ULTRIUM-TD1 SCSI Sequential Device
SDLT-320: Quantum SDLT-320 Sequential Drive
Right-click on the tape drive.
Select Properties from the pop-up menu.
Select the Driver tab on the properties page.
Click the Update driver... button. This will start the Upgrade
Device Driver Wizard. Click Next.
Select the option Search for a suitable driver for my device. Click
Next.
In Optional search locations check only CD-ROM drives. Click
Next.
Follow the instructions on the screen to locate the appropriate tape drive
for your library. Then click Next.
Required files will be installed for the driver now.
Click Finish.
Click Close on the Properties page.
In Device Manager, make sure that the appropriate device is listed
under Tape Devices. Available options are:
