Manuals

Introduction: Philips CDD5263 Slim CD-RW/DVD-ROM Drive User's Guide

Overview | Features | Precautions | Installation | Operation

Overview

The Philips CDD5263 is slim internal type with 12.7mm height, and is an IDE/ATAPI interface CD-RW/DVD-ROM drive. The drive is able to write CD-R/RW discs and also can perform as a regular DVD-ROM drive. The CDD5263 has 8X speed DVD-ROM disc reading, 24X speed CD-R disc writing, 24X speed CD-RW disc writing and 24X speed CD-ROM disc reading capabilities.

Features

The Philips CDD5263 CD-RW/DVD-ROM Drive has the following features:

12.7mm Height, Internal Type CD-RW/DVD-ROM Drive

Support 12 cm / 8 cm Disc 8X (10.56 Mbytes/sec, DVD) / 24X (3,600 Kbytes/sec, CD) Data Transfer Rate

8X DVD Disc Reading Speed / 24X CD-R Disc Writing Speed / 24X CD-RW Disc Writing Speed / 24X CD-ROM Reading speed

Variable Packet Writing

150 ms Random Access Time

IDE/ATAPI interface (compliant to ATA/ATAPI-6)

DVD-ROM & DVD-Video (DVD-5, DVD-9, DVD-10,DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, CD-DA CD-ROM/XA, CD-i, Karaoke CD, Video CD, Super Video CD, Multi-session Photo CD, Enhanced CD, I-trax CD, CD extra, CD Plus, CD-Text, CD-R and CD-RW Discs Compliant.

Support Windows 98, Windows Me, Windows NT, Windows 2000 and Windows XP Operating Systems.

Support Ultra DMA mode 0, 1, 2 Multi-word DMA mode 0, 1, 2 and PIO mode 0, 1, 2, 3, 4.

Support Buffer Underrun Protection.

Important Precautions

Precautions

Hold the disc by the edges, do not touch the surface of the disc.

To remove dust or fingerprint, use a clean, soft & dry cloth.

Do not write and paste anything on the recording/ reading side of the disc. Do not paste anything to the all surface of the CD-R/RW disc. Whenlabeling a CD-R/RW disc f or identification purposes, write only on the pre-marked label side using a soft, felt tip marker. Should not paste a large or thick label to the outer back surface (the label side) of the disc, or it generates drive vibration due to imbalance of the disc.

Do not store the disc in a place where the temperature or humidity is high.

Do not use benzene, thinners and cleaners, etc.

Do not make the center hole larger.

Do not bend the disc.

Do not drop the disc, or subject it to shock.

Installation

Avoid placing the drive in a location subject to :

High humidity

High temperature

Excessive Dust

Mechanical vibration

Direct sunlight

We recommend using the drive in a horizontal position.

Operation

Don't move the drive suddenly from a cold place to a warm one or raise the room temperature suddenly. Condensation may occur, causing abnormal operation.

Make sure to remove the disc before moving the drive. The disc may be damaged, causing data loss.

Be careful to prevent foreign objects, such as liquids or metal, from entering the drive.

Don't interrupt the electric power while the drive is operating.

Please read all restrictionsand disclaimers.

Back to Contents Page