Back to Contents Page
Resolving Software and Hardware Incompatibilities: Dell™
Dimension™ 8100 System Reference
This section explains how to resolve software and hardware
incompatibilities that may occur in the Microsoft® Windows 98 and Windows Me or Windows 2000 operating systems.
Windows 98 interrupt request (IRQ) conflicts occur if a device
either is not detected during the Windows 98 Plug and Play setup or is detected but
incorrectly configured.
To check for conflicts on a computer running Windows 98 or Windows Me:
- Click the Start button, point to Settings,
and click Control Panel.
- In the Control Panel, double-click System.
- Click the Device Manager tab.
- In the Device Manager list, check for conflicts with
the other devices.
Conflicts are indicated by a yellow exclamation point (!) beside the
conflicting device or a red X if the device has been disabled.
- Double-click any conflicting device listed to bring up the Properties
window so you can determine what needs to be reconfigured or removed from the Device
Manager.
Resolve these conflicts before checking specific devices.
- Double-click the malfunctioning device type in the Device
Manager list.
- Double-click the icon for the specific device in the expanded list.
The Properties window appears.
- Resolve any IRQ conflicts.
If there is an IRQ conflict, the Device status area
in the Properties window reports what cards or devices are sharing the
device's IRQ.
You can also use the Windows 98 Hardware Conflict
Troubleshooter. To use the troubleshooter, click the Start
button, click Help, and double-click Troubleshooting on
the Contents tab. Then double-click If you have
a hardware conflict. In
Windows Me, double-click Troubleshooting in the What would you
like help with? list, click Hardware & system device problems,
click Hardware, memory, & others, and then click Hardware
Troubleshooter. In Windows 2000, double-click Troubleshooting and
Maintenance on the Contents tab, and then double-click If
you have a hardware conflict.
To check for conflicts on a computer running Windows 2000:
- Click the Start button, point to Settings,
and click Control Panel.
- In the Control Panel, double-click System.
- Click the Hardware tab.
- Click Device Manager.
- Click View, and then click Resources
by connection.
- Double-click Interrupt request (IRQ) to view the IRQ
assignments.
Conflicts are indicated by a yellow exclamation point (!) beside the
conflicting device or a red X if the device has been disabled.
- Double-click any conflicting device listed to bring up the Properties
window so you can determine what needs to be reconfigured or removed from the Device
Manager. Resolve these conflicts before checking specific devices.
- Double-click the malfunctioning device type in the Device
Manager list.
- Double-click the icon for the specific device in the expanded list.
The Properties window appears.
If there is an IRQ conflict, the Device status area
in the Properties window reports what cards or devices are sharing the
device's IRQ. Resolve the IRQ conflicts.
You can also use the Windows 2000 Hardware Conflict
Troubleshooter. To use the troubleshooter, click the Start
button, click Help, and double-click Troubleshooting and
Maintenance on the Contents tab. Then double-click If
you have a hardware conflict.
Back to Contents Page
