Back to Contents Page

Speaker

Dell™ Inspiron™ 910 Service Manual

  Removing the Speaker

  Replacing the Speaker

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

Removing the Speaker

1. Follow the instructions in Before You Begin.
   
   
2. Remove the module cover (see Removing the Module Cover).
   
   
3. Remove the keyboard (see Removing the Keyboard).
   
   
4. Remove the palm rest (see Removing the Palm Rest).
   
   
5. Remove the display assembly (see Display Assembly).
   
   
6. Remove the display bezel (see Display Bezel).
   
   

1

screw (3)

2

speaker cable

7. Remove the three speaker screws from the display base.
   
   
8. Make note of the speaker cable routing.
   
   
9. Remove the speakers.
   
   

Replacing the Speaker

1. Replace the speakers and the speaker cables.
   
   
2. Replace the three speaker screws that secure the speakers to the display base.
   
   
3. Replace the display bezel (see Replacing the Display Bezel).
   
   
4. Replace the display assembly (see Replacing the Display Assembly).
   
   
5. Replace the palm rest (see Replacing the Palm Rest).
   
   
6. Replace the keyboard (see Replacing the Keyboard).
   
   
7. Replace the module cover (see Replacing the Module Cover).
   
   
8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
   
   

Back to Contents Page