Dell Latitude XT2 Service Manual--Removing and Replacing the Memory and Mini-Card Cover
Memory and Mini-Card Cover Dell Latitude
XT2 Service Manual
Removing the Memory and Mini-Card Cover
Replacing the Memory and Mini-Card Cover
WARNING: Before
working inside your Tablet-PC, read the safety information that shipped with your
Tablet-PC. For additional safety best practices information, see the Regulatory
Compliance Homepage at www.dell.com/regulatory_compliance.
Removing
the Memory and Mini-Card Cover
Follow the procedures in Before Working Inside
Your Tablet-PC . Remove the battery
from the Tablet-PC.
Loosen the two captive screws on the memory and mini-card cover.
Tilt the cover towards the front of the Tablet-PC.
Lift the cover at an angle, and remove from the Tablet-PC.
Replacing the Memory and Mini-Card Cover
Insert the tabs of the memory and mini-card cover into the slots of the base.
Rotate the cover down and into place.
Tighten the two captive screws on the memory and mini-card cover.
Install the battery. See Replacing the Main Battery .