|
Specifications: Dell UltraScan P1110 Color Monitor User's Guide
Back to Contents Page
Specifications: Dell UltraScan P1110 Color
Monitor User's Guide
General CRT Resolution Preset
Display Modes Electrical Physical
Characteristics Environmental
Power Management Modes Pin Assignments
Plug and Play Capability
|
|
|
| Model number |
UltraScan P1110 |
|
|
|
|
|
| Screen dimensions |
21 inches (19.8inch
viewable image size) |
| Preset display
area: |
|
Horizontal
|
388 ± 3.5 mm (15.3 inches
± 0.14 inches) |
Vertical
|
291 ± 3.5 mm (11.4 inches
± 0.14 inches) |
|
Aperture Gril Pitch
|
0.24 mm |
| Deflection angle |
90° |
| Phosphor type |
P22 |
| Faceplate coating |
AR coating |
|
|
|
|
|
| Horizontal scan
range |
30 kHz to 121 kHz (automatic) |
| Vertical scan
range |
48 Hz to 160 Hz (automatic) |
| Optimal preset
resolution |
1280 x 1024 at 85 Hz |
| Highest preset
resolution |
1600 x 1200 at 85 Hz |
| Highest addressable
resolution* |
1800 x 1440 at 75 Hz |
| * Addressable means the
monitor will sync up to this mode. However, Dell does not guarantee
the image will be sized and centered correctly.
Dell guarantees image size and centering for all
preset modes listed in the following table.
|
|
Preset Display Modes
| Display Mode |
Horizontal
Frequency (kHz) |
Vertical
Frequency (Hz) |
Pixel
Clock (MHz) |
Sync
Polarity (Horizontal /Vertical) |
| IBM®,
VGA2, 720 x 400 |
31.5
|
70 |
28.3
|
-/+ |
| IBM, VGA3, 640 x 480 |
31.5
|
60 |
25.2
|
-/- |
| VESA®,
640 x 480 |
43.3
|
85 |
36.0
|
-/- |
| VESA, 800 x 600 |
53.7
|
85 |
56.3
|
+/+ |
| VESA, 1024 x 768 |
60.0
|
75 |
78.8
|
+/+ |
| VESA, 1024 x 768 |
68.7
|
85 |
94.5
|
+/+ |
| VESA, 1280 x 1024 |
80.0
|
75 |
135.0
|
+/+ |
| VESA, 1280 x 1024 |
91.1
|
85 |
157.5
|
+/+ |
| VESA, 1600 x 1200 |
93.8
|
75 |
202.5
|
+/+ |
| VESA, 1600 x 1200 |
106.3
|
85 |
229.5
|
+/+ |
| GTF, 1800 x 1440 |
112.7
|
75 |
278.7
|
+/+ |
|
|
|
|
|
|
| Video input
signals |
analog, 0.7 Vpp, positive
at 75 ohm |
| Synchronization
input signals |
separate horizontal and vertical; and
composite
TTL level, positive or negative
Sync on Green at 0.3 Vp-p
|
| AC input voltage
/ frequency / current |
120/240V
50/60 Hz 2.0 A/1.0 A |
| Inrush current
at 120 V |
50 A |
| Inrush current
at 240 V |
80 A |
|
|
|
|
|
| Connector type |
15-pin D-subminiature |
| Signal cable
type |
Detachable cable |
| Dimensions: |
|
Height
|
491 mm (19.3 inches) |
Width
|
498 mm (19.6 inches) |
Depth
|
478 mm (18.8 inches) |
| Weight (monitor
only) |
32 kg (70.5 lb) |
| Weight (with
packaging) |
36 kg (79.4 lb) |
|
|
|
|
| Temperature: |
|
Operating
|
10° to 40°C (50° to 104°F) |
Nonoperating
|
40° to 60°C (40°
to 140°F) |
| Humidity: |
|
Operating
|
10% to 80% (noncondensing) |
Nonoperating
|
5% to 95% (noncondensing) |
| Altitude: |
|
Operating
|
3,048 m (10,000 ft) |
Nonoperating
|
10,675 m (35,000 ft) |
| Thermal dissipation |
494 BTU/hour (maximum)
426 BTU/hour (typical) |
Power Management Modes
If you have VESA's DPMS compliance display
card or software installed in your PC, the monitor can automatically reduce
its power consumption when not in use. If input from keyboard, mouse or other
input devices is detected, the monitor will automatically "wake up".
The following table shows the power consumption and signaling of this automatic
power saving feature:
Power Management Definition
|
VESA's Mode
|
Video
|
H-sync
|
V-sync
|
Power Used
|
LED color
|
|
ON
|
Active
|
Yes
|
Yes
|
minimum
100 W
maximum
145 W
typical
125 W
|
Green
|
|
Stand-by
|
Blanked
|
No
|
Yes
|
£100 W
|
Amber and Green alternate
|
|
Suspend
|
Blanked
|
Yes
|
No
|
5-15 W
|
Amber and Green alternate
|
|
Active-OFF
|
Blanked
|
No
|
No
|
0.5-1.5 W
|
Amber
|
|
OFF*
|
|
|
|
<1 W
|
|
This monitor is ENERGY STAR®-compliant and TCO'99
power management compatible. 
* Zero power consumption in OFF
mode can only be achieved by disconnecting the mains cable from the monitor.
ENERGY STAR® is a U.S. registered mark. As an ENERGY
STAR® Partner, DELL has determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
Pin Assignments
Pin Number |
15-Pin Side of the Signal Cable |
| 1 |
Video-Red |
| 2 |
Video-Green |
| 3 |
Video-Blue |
| 4 |
GND |
| 5 |
DDC-return |
| 6 |
GND-R |
| 7 |
GND-G |
| 8 |
GND-B |
| 9 |
+5 V |
| 10 |
GND-sync |
| 11 |
GND |
| 12 |
DDC data |
| 13 |
H-sync |
| 14 |
V-sync |
| 15 |
DDC clock |
You can install the monitor in any Plug and Play-compatible
system. The monitor automatically provides the computer system with its Extended
Display Identification Data (EDID) using Display Data Channel (DDC) protocols
so the system can configure itself and optimize the monitor settings. If desired,
the user can select different settings, but in most cases monitor installation
is automatic.
Back to Contents Page
|